1. Check whether the electric lubrication can work normally
According to the different properties and characteristics of each grease pump, a general view of the operating conditions of the lubrication pump is carried out. For example, whether the oil injection speed, operating environment, lubrication cycle are normal, whether the operation LED indicator is normal, whether the linkage between the external power supply and the equipment power supply, pressure switch, oil supply switch, and even whether the applied oil products are polluted, and so on.
2. Visually inspect the whole lubricating system for oil leakage
Visually inspect the oil leakage around the entire lubricating system, which can roughly recognize the general direction of oil leakage of the system. Then, it is necessary to check the main body of the lubricating pump. The main body of the lubricating pump is equipped with many parts and has high operating intensity. How the sealing parts in the pump body are poor in quality or may be damaged, even if the fasteners of the pump body do not work properly. These problems may lead to oil leakage. Therefore, Adilang's lubrication system has further strengthened these small details to ensure that everyone's details of the lubricating pump are in place. Secondly, check the condition of the oil circuit, distributor and lubrication point of the lubrication system.
3. Visually inspect each lubricating point of single line distributor
After the above review, we can also easily determine the local position of the problem through the lubrication condition of the distributor and each lubrication point, because the distributor is really the key position of oil leakage in the lubrication system, and it is also a simple place for Z to see. Because the probability of oil leakage from the lubrication system's half distributor is very high in the market, Adilang pays special attention to the planning and durability of the lubrication distributor, so it specially summarizes the causes and directions of oil leakage of most distributors, and makes targeted improvements to the previous distributors, greatly reducing the probability of defects or oil leakage, It can be said that this is another huge advantage of choosing the lubrication distributor independently planned by Adilang.
4. Check whether each sensor can respond normally with a multimeter
It is relatively difficult to view the lubricating grease locally. With the micro view above, we can view the operating conditions of each sensor in the whole lubricating system with special or professional methods, and eliminate the sensors that do not work one by one. In the future, we can further eliminate the situation that the sensors do not respond properly.
